Job Description
Mechanical Engineer (Mixing Vessel) (38K–41K) (SDG-112903) วิศวกรเครื่องกล (ถังผสม) 1 คน <Job responsibilities> - Communicate and to clarify mechanical engineering issue of Reactor and/or Agitator with existing Thai customer and/or foreign customer. - Understand customer specification and to Create specification for both customer and sub-vendors as project proposal, and to clarify engineering issue for both customer and sub-vendors. - Understand mechanical standard and to Communicate Japan factory members in English. factory members mean Design engineer, quality assurance section members, cost estimation section members and procurement section members. - Operate CAD software for mechanical Design work. - Support senior staff and Manager of process equipment dept about their activities in EECi technical center in Rayong. - Check fabrication condition and supplied mechanical parts condition if there are any different points for mechanical Design documents both drawing and specification. - Supervise installation and pre-commissioning of Reactor and/or Agitator at customer site or at sub-vendor site. - Understand passed Experience project and refer to passed experienced project to Design the new project equipment. - Report your assigned Work progress weekly as minimum Report frequencies. - Report team members not to be stayed project progress. - Arrange the meeting with customer and sub-vendors including dept members availabilities. - Create minute of meeting Report every time, this assigned Work shall be evaluated as important issue. <หน้าที่ความรับผิดชอบในงาน> - สื่อสารและชี้แจงประเด็นทางวิศวกรรมเครื่องกลของเครื่องปฏิกรณ์และ/หรือเครื่องกวนกับลูกค้าชาวไทยและ/หรือลูกค้าต่างประเทศที่มีอยู่ - เข้าใจข้อกำหนดของลูกค้าและจัดทำข้อกำหนดสำหรับทั้งลูกค้าและผู้ขายช่วงเป็นข้อเสนอโครงการ และชี้แจงปัญหาทางวิศวกรรมสำหรับทั้งลูกค้าและผู้ขายช่วง - เข้าใจมาตรฐานเชิงกลและสามารถสื่อสารกับสมาชิกโรงงานญี่ปุ่นเป็นภาษาอังกฤษ สมาชิกโรงงานหมายถึง วิศวกรออกแบบ สมาชิกฝ่ายประกันคุณภาพ สมาชิกฝ่ายประมาณต้นทุน และสมาชิกฝ่ายจัดซื้อ - ใช้งานซอฟต์แวร์ CAD สำหรับงานออกแบบเชิงกล - สนับสนุนเจ้าหน้าที่อาวุโสและผู้จัดการแผนกอุปกรณ์กระบวนการเกี่ยวกับการดำเนินกิจกรรมของพวกเขาในศูนย์เทคนิค EECi จังหวัดระยอง - ตรวจสอบสภาพการผลิตและสภาพชิ้นส่วนเครื่องจักรที่จัดหาให้หากมีจุดใด ๆ ที่แตกต่างกันในเอกสารการออกแบบเชิงกลทั้งแบบวาดและรายละเอียดจำเพาะ - กำกับดูแลการติดตั้งและการตรวจติดตามก่อนการใช้งานเครื่องปฏิกรณ์และ/หรือเครื่องกวนที่สถานที่ของลูกค้าหรือที่สถานที่ของผู้ขายช่วง - เข้าใจโครงการประสบการณ์ที่ผ่านมาและอ้างอิงโครงการประสบการณ์ที่ผ่านมาเพื่อออกแบบอุปกรณ์โครงการใหม่ - รายงานความคืบหน้างานที่ได้รับมอบหมายเป็นรายสัปดาห์ตามความถี่ในการรายงานขั้นต่ำ - รายงานความคืบหน้าโครงการให้สมาชิกในทีมไม่ค้างอยู่ - จัดการประชุมกับลูกค้าและผู้ขายรายย่อย รวมถึงความพร้อมของสมาชิกแผนก - จัดทำรายงานการประชุมทุกครั้ง งานที่ได้รับมอบหมายนี้จะถูกประเมินว่าเป็นเรื่องสำคัญ
Job Requirement
<Necessary Skill / Experience > - Thai nationality , Male , age 28 - 30 years old - Bachelor's degree - Bachelor's or master's degree holder of mechanical engineering or chemical engineering. - Have design engineering and/or site supervising experiences for heavy duty machine or mechanical equipment for 3 years - Have Driving license (company Provide car for visit customer) - Able to visit customer factory and supervise (it means production site). - Conversation in English, Use for communicate with report line and some customer (TOEIC 500) - Proficient in Auto CAD, for Design Mixing Vessel - Patient person who can continue assigned Work and to Communicate well. - Passion to be grown up himself/ herself, company Give the opportunities. - Has open mind to Communicate with Japanese and Thai staff is required.. - Understand Japanese working culture. Language Skill English level : Conversational Japanese level : None Workplace Area: BTS Phrom Phong Working Hour: 8:30-17:30(Mon.-Fri. Work in Office (Occasionally Sat. working depends on on-site working)) About the Benefits 38,000–41,000THB About the company Product & Service: Mixing Vessel Business Type: Machinery / Equipment / Plants; <ทักษะ / ประสบการณ์ที่จำเป็น > - สัญชาติไทย เพศชาย อายุ 28 - 30 ปี - ปริญญาตรี - สำเร็จการศึกษาระดับปริญญาตรี หรือ ปริญญาโท ทางด้านวิศวกรรมเครื่องกล หรือ วิศวกรรมเคมี - มีประสบการณ์ด้านวิศวกรรมการออกแบบและ/หรือการควบคุมดูแลไซต์งานสำหรับเครื่องจักรหนักหรืออุปกรณ์เครื่องกลเป็นเวลา 3 ปี - มีใบขับขี่รถยนต์ (บริษัทมีรถให้สำหรับออกพบลูกค้า) - สามารถเข้าโรงงานลูกค้าและควบคุมดูแล(หมายถึงสถานที่ผลิต)ได้ - การสนทนาภาษาอังกฤษ ใช้เพื่อสื่อสารกับสายรายงานและลูกค้าบางราย (TOEIC 500) - เชี่ยวชาญโปรแกรม Auto CAD สำหรับการออกแบบภาชนะผสม - ผู้มีความอดทน สามารถทำงานที่ได้รับมอบหมายอย่างต่อเนื่อง และมีการสื่อสารที่ดี - มีใจรักการเติบโตด้วยตนเอง - มีจิตใจเปิดกว้างในการสื่อสารกับพนักงานชาวญี่ปุ่นและชาวไทย - เข้าใจวัฒนธรรมการทำงานของญี่ปุ่น ทักษะด้านภาษา ระดับภาษาอังกฤษ : สนทนา ระดับภาษาญี่ปุ่น : ไม่มี สถานที่ทำงาน : BTS พร้อมพงษ์ เวลาทำการ : 8:30-17:30 น. (จันทร์-ศุกร์ ทำงานในออฟฟิศ (บางครั้งทำงานในวันเสาร์ ขึ้นอยู่กับการทำงานในสถานที่)) เกี่ยวกับผลประโยชน์ 38,000–41,000บาท เกี่ยวกับบริษัท สินค้าและบริการ : ภาชนะผสม ประเภทธุรกิจ : เครื่องจักร / อุปกรณ์ / โรงงาน;